heim rod ends - hm series

Part Number Bore Ball Width Housing Width Head Diameter Length to
Center of Ball
Thread Length Thread Size Ball Diameter Ball Flat Diameter Max Static
Radial Load
Approx Weight
Dimensions in Inches lbf lb
B W H D F A M E O    
+.0015
- .0005
+.000
- .005
+.005
- .005
+.010
- .010
+.010
- .010
+.062
-.031
 UNF-3A  REF REF 
HF3 0.1900 0.3120 0.2500 0.6250 1.2500 0.7500 .1900-32 0.4370 0.3060 900 0.03
HF4 0.2500 0.3750 0.2810 0.7500 1.5620 1.0000 .2500-28 0.5150 0.3530 1,700 0.05
HF5 0.3125 0.4370 0.3440 0.8750 1.8750 1.2500 .3125-24 0.6250 0.4470 2,500 0.08
HF6 0.3750 0.5000 0.4060 1.0000 1.9380 1.2500 .3750-24 0.7180 0.5160 4,000 0.12
HF7 0.4375 0.5620 0.4370 1.1250 2.1250 1.3750 .4375-20 0.8120 0.5860 5,000 0.17
HF8 0.5000 0.6250 0.5000 1.3120 2.4380 1.5000 .5000-20 0.9370 0.6980 7,000 0.26
HF10 0.6250 0.7500 0.5620 1.5000 2.6250 1.6250 .6250-18 1.1250 0.8390 8,050 0.41
HF12 0.7500 0.8750 0.6870 1.7500 2.8750 1.7500 .7500-16 1.3120 0.9780 11,300 0.64
HF16 1.0000 1.3750 1.0000 [4] 2.7500 [4] 4.1250 2.1250 1.2500-12 1.8750 1.2750 28,400 2.25

Outer Member:

Carbon steel, with protective coating for corrosion resistance

  NOTES:  
Ball:
52100 Alloy steel, heat treated, and chrome plated
  [1]

Add letter "L" to prefix to indicate Left Hand thread. Example: HML4

Inserts:
Brass
16 size has a one piece carbon steel race
  [2]

For design options and data, see Engineering Section

  [3]

"H" tolerance across inserts is +/-.015

 
 
  [4]

Tolerances for 16 size:

 
 
   
"D" +.030/- .010
       
"H" +.030/- .010