RBC Bearings is the leader in self-lubricating technology with our
patented Fiberglide® liners. We produce a broad line of standard inch
and metric self-lubricating bearings in journal and thrust configurations.
This unique bearing product offers the user design freedom as well as
cost benefits from its “maintenance free” characteristics.
The self-lubricating thrust and journal bearings are suited for applications
where normal lubrication is difficult or costly. Fiberglide® lined thrust
and journal bearings are designed to be used under oscillating motion,
interrupted start-stop, or axial motion. They are recommended where
high loads are combined with low surface speeds. Fiberglide® products
can also be used where non-lubricating fluids might be present.
| Type |
Description |
Dimensions |
Applications |
 |
CJS
Journal bearings, coiled steel backing, zinc plated. |
Nom.
shaft diameter-
.375 to 10.000
Bearing length- .
250 to 6.50
Wall thickness-
.045 to .093 |
The
CJS bearing works excellent in any pivot or linkage application.
For construction and farm equipment, this product is typically used
in kingpins, rock shafts, differentials, hinges, pedals and many
other pivot points. |
 |
CJT
Journal bearings,thin walled, coiled steel backing, zinc plated |
Nom.
shaft diameter-
.500 to 10.000
Bearing length-
.375 to 6.50
Wall thickness -
.060 |
This
bearing is designed as a direct replacement with conventional 1/16"
wall bushings. These bearings are used in self-lubricated chain,
variable speed sheaves, boom pivot points on fork lifts and many
similar applications. |
 |
CJH
Journal bearings, heavy walled, coiled steel backing, zinc plated |
Nom.
shaft diameter-
.750 to 10.000
Bearing length -
.375 to 11.00
Wall thickness -
.125 |
This
bearing is designed as a direct replacement with the conventional
1/8" wall bronze bushings. Typical applications include suspension
points on large trucks and railroad cars. These products are also
used in the boom foot pivot of large cranes. |
 |
CJM
Metric Journal bearings, coiled steel backing, zinc plated |
Nom.
shaft diameter-
8MM to 120MM
Bearing length-
8MM to 165MM
Wall thickness-
1.0 to 2.5MM |
This
product is the metric equivalent to the CJS product and used in
similar applications. |
 |
LJS
Journal bearings, liner type, non-metallic |
Nom.
shaft diameter-
1.000 to 12.000
Bearing length-
.375 to 6.50
Wall thickness-
.022 to .062 |
These
bearings are used in many harsh applications and in food handling
machinery. Typical applications include butterfly valves and trunnion
support pivots. This product is also used in sheaves and hoists
for marine applications. |
 |
FTS
Thrust bearings, metal-backed, single sided |
Nom.
shaft diameter-
.250 to 3.250
I.D. - .280 to 3.312
O.D. - .500 to 4.875
Thickness-
.030 to .060 |
These
bearings accommodate thrust in clutches, hospital beds, screw jacks,
valve actuators, vehicle suspensions, and many other applications. |
|
LTD
Thrust bearings, laminated phenolic-backed, double-sided |
Nom.
shaft diameter-
.250 to 3.250
I.D. - .280 to 3.312
O.D. - .500 to 4.875
Thickness-
.030 to .094 |
These
bearings are used in cam actuator arms, turntable support bearings,
exercise equipment, truck differentials and many other applications. |
|
FTP
Thrust packs, Two piece assembly |
I.D.
- 1.000 to 3.000
O.D. -1.750 to 4.625
Thickness- .130 |
These
bearings are used in articulated frame joints, pivot arm supports,
kingpins and many other applications. |
 |
SJR
Sealed Journal Brgs. solid cold rolled steel sleeve with two polyurethane
seals. |
Nom.
shaft diameter-
1.000 to 5.000
Bearing length-
1.000 - 4.000
Wall thickness-
.250 - .375 |
These
bearings are used in crane boom foot positions, wheels and pallet
jacks, frame supports for large trucks and other construction equipment
and many other applications. |
